Return to list


5328A
HP 5328A
  • Hewlett Packard 5328A Universal Counter
  • Universal timer, counter,digital voltmeter
  • Frequency range to 1.3 GHz
  • Oven time base
  • Period 100 nS to 107 Seconds
  • Time interval 10 nS to 107 Seconds
  • Switchable AC/DC, +/- slope and input attenuator
  • Frequency ratio
  • R 325 / Mo.

Return to list


GR 1650A
GR 1650A
  • General Radio 1650A Impedance Bridge
  • Portable, self contained oscillator/bridge/detector
  • Measures R, L, C, D and Q
  • External frequency tests 20 to 20 kHz
  • C, 1 pF to 1000uF; l, 1 uH to 1100 Hy; r, 1 m ohm to 1.1 M ohm
  • External bias connections for voltage or current
  • R 300 Mo.

Return to list


Tek TDS-320 TDS-320

  • Tektronix TDS-320 Digitising Oscilloscope
  • 500 MS/S Digitising rate, 100 MHz bandwidth, 2 ch.
  • 1000 sample depth, each channel
  • Peak detect mode for capturing high frequency glitches
  • 2 mV to 10 V/div. vertical, 5 nS to 10 S/dev horizontal
  • TV triggering, cursor measurements, 10 setting memory
  • RS-232 +GPIB +dot matrix or laser screen dump
  • R 820 / Mo.

Return to list


Tek 465B
Tek 465B
  • Tektronix 465B Analogue Oscilloscope
  • DC to 100 MHz, 2 channel analogue
  • 5 mV/div. to 5 V/div vertical sensitivity
  • .02 uS/div. to .5 S/div horizontal sweep time (0-.2 nS/ x 10 mag.)
  • Trigger view, alternate sweep, sweep delay
  • X/Y display, Z axis input, external trigger
  • Amplitude calibrator..... very popular lab o'scope
  • R 425 / Mo.

Return to list


Tek 2215A
Tek 2215A
  • Tektronix 2215A Analogue Oscilloscope
  • DC to 60 MHz, 2 channels
  • 2 mV vertical sensitivity, 5 nS max sweep speed
  • Delayed sweep, advanced trigger system
  • Large bright CRT
  • Lightweight, easy to use
  • 2 x 10 probes included
  • R 295 / Mo
Return to list
HP 3575a
HP 3475A
  • Hewlett Packard 3475A Gain-Phase Meter
  • 2 Hz to 10 MHz
  • Measures amplitude, amplitude ratio and phase
  • +/- 192 degrees, 0.1 degree resolution
  • Two LED displays, analogue outputs
  • R 745 / Mo.
Return to list
Tek PS283
Tek PS 283
  • Tektronix PS-283 Triple Power Supply
  • Two 0 to 30 volt supplies @ 1 Amp with variable current limiting
  • 5 Volt fixed, limited at 3 Amps
  • Two LED digital displays
  • R 235 / Mo.
Return to list
Fluke 6060B
Fluke 6060B
  • Fluke 6060B Signal Generator
  • 10 Hz to 1.05 GHz, synthesized
  • 10 Hz resolution
  • -127 to +13 dBm output level @ 50 Ohms, 0.1 dB resolution
  • AM & FM internal and external modulation
  • Reverse power protection
  • R 1250 / Mo

Return to list


HP 8648A
HP 8648A
  • Hewlett Packard 8648A Signal Generator
  • 100 kHz to 1 GHz, synthesized, 10 Hz display resolution
  • -136 to +10 dBm output level, 0.1 dB steps
  • Frequency amplitude and phase modulation
  • 300 Storage registers, full HPIB operation
  • R 1825 / Mo

Return to list